A paperback on Amazon’s Kindle Direct Publishing (KDP) is made from two files you upload: the pages of the book as a PDF, and a cover as a separate PDF. KDP prints a copy each time someone orders, so the files have to match the size and margins you choose exactly. This guide walks through the whole process in the order KDP asks for it.
1. Finish and proofread the text first
Every later step depends on your page count: the inside margin, the spine width and the cover size all change with it. Editing after you have made the cover usually means redoing the cover. Get the words final before you format.
- Mark every chapter title as a heading (Word’s Heading 1 style, or
## Chapter titlein Markdown). - Use a single marker such as
* * *for scene breaks instead of blank lines. - Remove any typed-in table of contents with page numbers. The finished book needs its own.
2. Choose a trim size
Trim size is the finished size of the book. KDP’s default, and the most common size in the US, is 6 × 9 in. Smaller sizes such as 5 × 8 in and 5.5 × 8.5 in suit novels and memoir; they add pages but feel more like a bookshop paperback. KDP also lets you enter a custom size within its limits. Each size has its own minimum and maximum page count, listed in KDP’s trim size table. For a side-by-side comparison, see KDP trim sizes and margins, explained.
3. Choose ink and paper
For a text book, choose black ink. KDP offers cream paper, which is easier on the eyes and typical for fiction, and white paper, which suits nonfiction with charts or photos. Color ink costs more and is only worth it if the pages themselves need color. KDP locks the ink type once the book is published, so decide now.
4. Set up the pages with the right margins
KDP trims every book after printing, so it requires margins that keep text safely away from the edges and out of the spine. The inside margin (the gutter) grows with page count because thicker books curve more at the spine. These are KDP’s published minimums for a book without bleed:
| Page count | Inside margin | Top, bottom and outside |
|---|---|---|
| 24 to 150 | 0.375 in | at least 0.25 in |
| 151 to 300 | 0.5 in | at least 0.25 in |
| 301 to 500 | 0.625 in | at least 0.25 in |
| 501 to 700 | 0.75 in | at least 0.25 in |
| 701 to 828 | 0.875 in | at least 0.25 in |
These are minimums, not targets. Professionally set books use noticeably wider margins, with running heads and page numbers kept well inside them. If any image or color needs to run to the edge of the page, the whole file must be set up with bleed: the page is 0.125 in wider and 0.25 in taller than the trim size, and the outside margins grow to at least 0.375 in. A text-only book doesn’t need bleed.
5. Lay out the front matter and chapters
A finished book opens with a few standard pages before the story: usually a half title, the title page, a copyright page on its back, an optional dedication and a contents page. Chapters then begin, traditionally on right-hand pages. Front matter and back matter: what goes where covers the order, and copyright page examples covers what to put on that page.
This is where most of the work is: running heads, page numbers that start at chapter one, chapter openings, justified and hyphenated text, and no stranded single lines at the top or bottom of pages. Word can do it with section breaks and a lot of patience. Dedicated layout software does it more reliably. A tool like Manuscript Packet does it automatically from your manuscript.
6. Save a print-ready PDF
KDP accepts several formats for the paperback manuscript, but a PDF is the safest because what you see is exactly what prints. KDP calls this file your “manuscript” or “interior file”. Before you upload it, check that:
- every page is exactly your trim size (or trim plus bleed), one page per sheet, with no crop marks;
- all fonts are embedded (in a PDF reader, look under File → Properties → Fonts);
- blank pages are really in the file, so chapters land on the pages you intended.
The print-ready checklist has the full list.
7. Make the cover to match the page count
The cover is one image: back, spine and front, with bleed on all sides. Its width depends on your trim size, paper and final page count, which sets the spine width. KDP’s free Cover Creator can build one for you, or you can use KDP’s cover calculator and templates, or work with a designer. Our spine width calculator gives the full cover size. If your book has fewer than about 80 pages, KDP won’t allow text on the spine.
8. Set up the book on KDP
- Details: title, subtitle, author, description, keywords and categories. Make the title and author match the title page exactly.
- ISBN: take KDP’s free ISBN or use your own. A paperback needs its own ISBN, separate from the ebook.
- Print options: the ink, paper, trim size, bleed setting and cover finish you chose above.
- Upload the PDF and the cover, then open the Print Previewer.
9. Fix anything the previewer flags
The previewer shows every page as it will print and flags problems such as text outside the margins, missing fonts or a page size that doesn’t match. Fix the file and upload again until it’s clean. Then page through the whole book once yourself; the previewer checks the rules, not whether chapter seven starts where you expect.
10. Order a proof before you publish
A printed proof costs a few dollars plus shipping and is the only way to judge the paper, the type size and the margins in your hands. Read a chapter in it. When it looks right, set your price and publish. KDP usually reviews a new paperback within a few days.
Publishing the ebook too? KDP accepts an EPUB, so the same manuscript can become both editions. See which file each store needs.
Margin and bleed figures are from KDP’s help page “Set Trim Size, Bleed, and Margins”. KDP updates its requirements from time to time, so check its help pages before you publish.